Description
Fits: 2005-2016 Ford F-250/350 4WD (Front) Lifted 0"-2.5"
The Bilstein 5160 Series Shock Absorber 25-187779 are a direct fit for your 2005-2016 Ford F-250/350 4WD Pickup. This bolt-in replacement is deisnged to help you avoid the fabrication generally associated with being able to run a high performance reservoir shock. The monotube shocks feature a 46mm digressive piston with self-adjusting deflective disc valving. Benefits of the reservoir include increased cooling capacity and increased shock travel. Zinc-plated steel body, Triple-C-Technology coating.
Part Number: 25-187779 Old Part Number: F4-BR5-H075-H0 Series: 5160 Series Drive Type: 4WD Position: Front Descriptor: Front Lifted Height: 0-2.5" Quantity Per Vehicle: 2
Note: Lift Height is suggested by mfg. Due to the many different aftermarket suspension systems it is recommended that a measurement is taken for proper application. A pin to eye shock is measured from the base of the stem where the mounting hardware rests to the center of the eyelet. Shock Absorbers sold individually.
The Bilstein 5160 Series Shock Absorber 25-187779 are a direct fit for your 2005-2016 Ford F-250/350 4WD Pickup. This bolt-in replacement is deisnged to help you avoid the fabrication generally associated with being able to run a high performance reservoir shock. The monotube shocks feature a 46mm digressive piston with self-adjusting deflective disc valving. Benefits of the reservoir include increased cooling capacity and increased shock travel. Zinc-plated steel body, Triple-C-Technology coating.
Specifications:
Part Number: 25-187779 Old Part Number: F4-BR5-H075-H0 Series: 5160 Series Drive Type: 4WD Position: Front Descriptor: Front Lifted Height: 0-2.5" Quantity Per Vehicle: 2 Measurements:
*Collapsed Length (IN): 13.58 *Extended Length (IN): 22.34 *Collapsed Length (MM): 345 *Extended Length (MM): 567.5 Finish: Zinc Plated Reservoir: Yes Body Design: 46mm ID Smooth Body (Non-Coilover)Note: Lift Height is suggested by mfg. Due to the many different aftermarket suspension systems it is recommended that a measurement is taken for proper application. A pin to eye shock is measured from the base of the stem where the mounting hardware rests to the center of the eyelet. Shock Absorbers sold individually.
